‘Steve, we are busy so it’s all hands on deck. Move that display table over nea

FIND A SOLUTION  AT  AmericanWritingHelp.com

‘Steve, we are busy so it’s all hands on deck. Move that display table over near the door. You’d better fill it up with the sales items too. Then get these lay-bys away. They’re clogging up under the counter. Oh and where’s the paper roll refill for the register? It’ll run out in a couple of hours, and look, there’s a customer looking lost. Fix them up eh?’1In what order should Steve carry out these tasks? Number the following tasks (one to five) in the order that you think they should be carried out.’Steve, we are busy so it’s all hands on deck. Move that display table over near the door. You’d better fill it up with the sales items too. Then get these lay-bys away. They’re clogging up under the counter. Oh and where’s the paper roll refill for the register? It’ll run out in a couple of hours, and look, there’s a customer looking lost. Fix them up eh?’1In what order should Steve carry out these tasks? Number the following tasks (one to five) in the order that you think they should be carried out.’Steve, we are busy so it’s all hands on deck. Move that display table over near the door. You’d better fill it up with the sales items too. Then get these lay-bys away. They’re clogging up under the counter. Oh and where’s the paper roll refill for the register? It’ll run out in a couple of hours, and look, there’s a customer looking lost. Fix them up eh?’1In what order should Steve carry out these tasks? Number the following tasks (one to five) in the order that you think they should be carried out.Why should the allocated tasks be done in this order?

Assignment status: Already Solved By Our Experts

(USA, AUS, UK & CA  PhD. Writers)

>> CLICK HERE TO ORDER 100% ORIGINAL PAPERS FROM AmericanWritingHelp.com <<

#065

You are required to design and display 3D objects in

FIND A SOLUTION  AT  AmericanWritingHelp.com

300029 ENGINEERING VISUALIZATION: FINAL PROJECT
Dr. J.J. Zou, WSU School of Computing, Engineering and Mathematics Page 1300029 ENGINEERING VISUALIZATIONFINAL PROJECTReport due: 23:59, Sunday, 17/06/18.
Submission: Submission details are given in Section III of this document.I. AimYou are required to design and display 3D objects in this project. The project aims to examine your
understanding and application of essential 3D graphics concepts including modelling, projection,
transformation, visible-surface determination, illumination, shading and texture mapping.II. Tasks1. Design a 3D object that consists of at least five curved surfaces (e.g. spherical surfaces or cylindrical
surfaces) and at least seven planar surfaces. Display the object in the form of a wire-frame using an
orthographic parallel projection. The coordinates of the object and the projection parameters should be
properly selected so that the projection plane is not perpendicular to a surface of the object. The curved
surfaces can be approximated by a polygon mesh for display. Place your drawing code in the drawing
function of Display_1 (Display_1::Draw(…)) in the sample program ‘EV_Shell_GL_CV’. Your result should
show when the key ‘1’ on the keyboard is pressed.
Listed below are the requirements for this task, which should be addressed in your report.
i. Explain the design of the 3D object. What are the components of the object? How do they join
together? How is each component expressed mathematically? How does your design meet the
requirements specified in this task?
ii.
Explain how the object is displayed using an orthographic projection of your choice. What are the
parameters for this particular orthographic projection?
Summarise the C++ source code that you have written for the task using a sequence of steps, a flow
chart or pseudo-code.
Explain each step of your C++ source code clearly so that an experienced reader can repeat the task
to obtain the same result without the need of your C++ code.
Include the drawing result of the task in your report.
Explain the drawing result you have obtained (e.g., what has been drawn? Have you drawn what you
are asked to draw?).
iii.
iv.
v.
vi.
2. Rotate the object designed in Task 1 through 360 about an axis that passes through it. Rotate the object by
steps of 5 so that a viewer can see it rotating. The projection parameters should be properly selected so that
the projection plane is not always perpendicular to a surface of the object. Place your drawing code in the
drawing function of Display_2 (Display_2::Draw(…)) in the sample program ‘EV_Shell_GL_CV’. Your
result should show when the key ‘2’ on the keyboard is pressed.
Listed below are the requirements for this task, which should be addressed in your report.
i.
Explain how the object is rotated. How is your particular axis for rotation expressed mathematically?
How is your operation of rotation expressed mathematically?
Summarise the C++ source code that you have written for the task using a sequence of steps, a flow
chart or pseudo-code.
Explain each step of your C++ source code clearly so that an experienced reader can repeat the task
to obtain the same result without the need of your C++ code.
Include the drawing result of the task in your report.
ii.
iii.
iv.
v. Explain the drawing result you have obtained (e.g., what ha…

Assignment status: Already Solved By Our Experts

(USA, AUS, UK & CA  PhD. Writers)

>> CLICK HERE TO ORDER 100% ORIGINAL PAPERS FROM AmericanWritingHelp.com <<

#065

Original essay on: You are required to design and display 3D objects

FIND A SOLUTION  AT  AmericanWritingHelp.com

300029 ENGINEERING VISUALIZATION: FINAL PROJECT
Dr. J.J. Zou, WSU School of Computing, Engineering and Mathematics Page 1300029 ENGINEERING VISUALIZATIONFINAL PROJECTReport due: 23:59, Sunday, 17/06/18.
Submission: Submission details are given in Section III of this document.I. AimYou are required to design and display 3D objects in this project. The project aims to examine your
understanding and application of essential 3D graphics concepts including modelling, projection,
transformation, visible-surface determination, illumination, shading and texture mapping.II. Tasks1. Design a 3D object that consists of at least five curved surfaces (e.g. spherical surfaces or cylindrical
surfaces) and at least seven planar surfaces. Display the object in the form of a wire-frame using an
orthographic parallel projection. The coordinates of the object and the projection parameters should be
properly selected so that the projection plane is not perpendicular to a surface of the object. The curved
surfaces can be approximated by a polygon mesh for display. Place your drawing code in the drawing
function of Display_1 (Display_1::Draw(…)) in the sample program ‘EV_Shell_GL_CV’. Your result should
show when the key ‘1’ on the keyboard is pressed.
Listed below are the requirements for this task, which should be addressed in your report.
i. Explain the design of the 3D object. What are the components of the object? How do they join
together? How is each component expressed mathematically? How does your design meet the
requirements specified in this task?
ii.
Explain how the object is displayed using an orthographic projection of your choice. What are the
parameters for this particular orthographic projection?
Summarise the C++ source code that you have written for the task using a sequence of steps, a flow
chart or pseudo-code.
Explain each step of your C++ source code clearly so that an experienced reader can repeat the task
to obtain the same result without the need of your C++ code.
Include the drawing result of the task in your report.
Explain the drawing result you have obtained (e.g., what has been drawn? Have you drawn what you
are asked to draw?).
iii.
iv.
v.
vi.
2. Rotate the object designed in Task 1 through 360 about an axis that passes through it. Rotate the object by
steps of 5 so that a viewer can see it rotating. The projection parameters should be properly selected so that
the projection plane is not always perpendicular to a surface of the object. Place your drawing code in the
drawing function of Display_2 (Display_2::Draw(…)) in the sample program ‘EV_Shell_GL_CV’. Your
result should show when the key ‘2’ on the keyboard is pressed.
Listed below are the requirements for this task, which should be addressed in your report.
i.
Explain how the object is rotated. How is your particular axis for rotation expressed mathematically?
How is your operation of rotation expressed mathematically?
Summarise the C++ source code that you have written for the task using a sequence of steps, a flow
chart or pseudo-code.
Explain each step of your C++ source code clearly so that an experienced reader can repeat the task
to obtain the same result without the need of your C++ code.
Include the drawing result of the task in your report.
ii.
iii.
iv.
v. Explain the drawing result you have obtained (e.g., what ha…

Assignment status: Already Solved By Our Experts

(USA, AUS, UK & CA  PhD. Writers)

>> CLICK HERE TO ORDER 100% ORIGINAL PAPERS FROM AmericanWritingHelp.com <<

#065

Apply the procedures for argumentation analysis (located in Chapter 8) to display contending…

FIND A SOLUTION  AT  AmericanWritingHelp.com

Write a five (5) page paper in which you: (Note: Refer to Review Question 8 located at the end of Chapter 3 for criteria 1-3.)
1. Apply the procedures for argumentation analysis (located in Chapter 8) to display contending positions and underlying assumptions for the content of Review Question 1.
2. Rate the assumptions and plot them according to their plausibility and importance. (Refer to Figure 3.16, “Distribution of warrant by plausibility and importance.”)
3. Determine which arguments are the most plausible. Provide a rationale for your views. (Note: Refer to Demonstration Exercise 1 located at the end of Chapter 3 for criteria 4-6.)
4. Apply the procedures for stakeholder analysis presented in Box 3.0 “Conducting a Stakeholder Analysis” to generate a list of stakeholders who affect or are affected by problems in the issue area chosen for analysis. 5. Create a cumulative frequency distribution from the list, placing stakeholders (numbered 1 – n) on the horizontal axis; placing the number of new ideas generated by each stakeholder; and then connecting the total new ideas of each stakeholder with a line graph. (Note: The ideas may be objectives, alternatives, outcomes causes, etc.; ideas should not be duplicates. The frequency distribution can be created in Excel or PowerPoint using the chart feature.)
6. Write an analysis of the results of the frequency distribution that answers the following questions: (a) Does the line graph flatten out? (b) If so, after how many stakeholders? (c) What conclusions can be drawn about the policy problems in the issue area? (Note: Compare your work with Case Study 3.1 at the end of the chapter.)
7. Provide at least two (2) academic or government resources to support your views. (Note: Do not use open source Websites such Wikipedia, Sparknotes.com, Ask.com, and similar Websites are not acceptable resources.)
Your assignment must follow these formatting requirements:  Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format
Click here for more on this paper…….
Click here to have a similar A+ quality paper done for you by one of our writers within the set deadline at a discounted…..
Originally posted 2014-01-08 01:53:00. Topic: Apply the procedures for argumentation analysis (located in Chapter 8) to display contending positions and underlying assumptions for the content of Review Question 1

The Best Academic Writing Company

Assignment status: Already Solved By Our Experts

(USA, AUS, UK & CA  PhD. Writers)

>> CLICK HERE TO ORDER 100% ORIGINAL PAPERS FROM AmericanWritingHelp.com <<

#075

You are required to design and display 3D objects

FIND A SOLUTION  AT  AmericanWritingHelp.com

300029 ENGINEERING VISUALIZATION: FINAL PROJECT
Dr. J.J. Zou, WSU School of Computing, Engineering and Mathematics Page 1
300029 ENGINEERING VISUALIZATION
FINAL PROJECT
Report due: 23:59, Sunday, 17/06/18.
Submission: Submission details are given in Section III of this document.
I. Aim
You are required to design and display 3D objects in this project. The project aims to examine your
understanding and application of essential 3D graphics concepts including modelling, projection,
transformation, visible-surface determination, illumination, shading and texture mapping.
II. Tasks
1. Design a 3D object that consists of at least five curved surfaces (e.g. spherical surfaces or cylindrical
surfaces) and at least seven planar surfaces. Display the object in the form of a wire-frame using an
orthographic parallel projection. The coordinates of the object and the projection parameters should be
properly selected so that the projection plane is not perpendicular to a surface of the object. The curved
surfaces can be approximated by a polygon mesh for display. Place your drawing code in the drawing
function of Display_1 (Display_1::Draw(…)) in the sample program ‘EV_Shell_GL_CV’. Your result should
show when the key ‘1’ on the keyboard is pressed.
Listed below are the requirements for this task, which should be addressed in your report.
i. Explain the design of the 3D object. What are the components of the object? How do they join
together? How is each component expressed mathematically? How does your design meet the
requirements specified in this task?
ii.
Explain how the object is displayed using an orthographic projection of your choice. What are the
parameters for this particular orthographic projection?
Summarise the C++ source code that you have written for the task using a sequence of steps, a flow
chart or pseudo-code.
Explain each step of your C++ source code clearly so that an experienced reader can repeat the task
to obtain the same result without the need of your C++ code.
Include the drawing result of the task in your report.
Explain the drawing result you have obtained (e.g., what has been drawn? Have you drawn what you
are asked to draw?).
iii.
iv.
v.
vi.
2. Rotate the object designed in Task 1 through 360 about an axis that passes through it. Rotate the object by
steps of 5 so that a viewer can see it rotating. The projection parameters should be properly selected so that
the projection plane is not always perpendicular to a surface of the object. Place your drawing code in the
drawing function of Display_2 (Display_2::Draw(…)) in the sample program ‘EV_Shell_GL_CV’. Your
result should show when the key ‘2’ on the keyboard is pressed.
Listed below are the requirements for this task, which should be addressed in your report.
i.
Explain how the object is rotated. How is your particular axis for rotation expressed mathematically?
How is your operation of rotation expressed mathematically?
Summarise the C++ source code that you have written for the task using a sequence of steps, a flow
chart or pseudo-code.
Explain each step of your C++ source code clearly so that an experienced reader can repeat the task
to obtain the same result without the need of your C++ code.
Include the drawing result of the task in your report.
ii.
iii.
iv.
v. Explain the drawing result you have obtained (e.g., what has been drawn? Have you drawn what you
are asked to draw?).
300029 ENGINEERING VISUALIZATION: FINAL PROJECT
Dr. J.J. Zou, WSU School of Computing, Engineering and Mathematics Page 2
3. Repeat Task 2 with the following additional requirements in visualizing your object.
a. Only show the visible surface of the object. It is assumed that the surface of the object is opaque.
b. Use the z-buffer (depth-buffer) algorithm to determine the visible surface.
c. Shade the visible surface using solid colours.
d. Use different colours for different surfaces. Divide each curved surface into at least three parts and shade
the parts with different colours.
Place your drawing code in the drawing function of Display_3 (Display_3::Draw(…)) in the sample program
‘EV_Shell_GL_CV’. Your result should show when the key ‘3’ on the keyboard is pressed.
Listed below are the requirements for this task, which should be addressed in your report.
i.
Explain how the visible surface of the object is displayed using the z-buffer (depth-buffer) algorithm
in this case. …

Assignment status: Already Solved By Our Experts

(USA, AUS, UK & CA  PhD. Writers)

>> CLICK HERE TO ORDER 100% ORIGINAL PAPERS FROM AmericanWritingHelp.com <<

#075

Explain the advantages and disadvantages of using spreadsheets to display information in reporting.

FIND A SOLUTION  AT  AmericanWritingHelp.com

The discussion assignment for this week includes a review of the Final Project Outline completed by one of your classmates, as well as a substantial response to at least one other student.
Primary Task Response: Your first task is to post your own Final Project Outline to the discussion area so that other students are able to review your plan. Attach your document to the main discussion post, and include any notes you feel are appropriate. The purpose of this assignment is to help improve the quality of the Final Project Draft you will complete next week.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Part 1
For your Final Project, you will choose a topic in health care (e.g. cardiovascular issues, obesity, or cancer) and analyze it. Then, integrate all of the steps and standards that are needed to meet the quality improvement and performance regulations that are accredited by such organizations as The Joint Commission (TJC) and the National Committee for Quality Assurance (NCQA). .
Now, you will present your work to key stakeholders in your organization. Create a PowerPoint presentation of 10-12 slides with speaker notes of 75-150 words which includes the following:
Explain why your health care topic is an important area of concern and research, and explain the challenges that will impact its population in the coming years based on your research.
Support your findings with an application of descriptive statistics.
Explain your grounded research capabilities.
Discuss risk-management assessment.
Present the data outcome in an Excel spreadsheet.
Include at least 4 credible references. All sources should be in APA format.
Part 2
Your department has taken the lead in developing many styles of reports. This work has raised a few questions throughout the organization. Therefore, you have been asked to present some helpful information on the structure of reporting. Draft a memo that explains the guidelines to follow when creating a memo for reporting purposes.
Explain the advantages and disadvantages of using spreadsheets to display information in reporting.
Explain which of the following are the best graphs to use in this situation, and why:
Tables
Pie charts
Line graphs
Bar graphs
Incorporate at least 1 chart or graph that demonstrates when it is appropriate to use one chart or graph over another.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Part 1
For your Final Project, you will choose a topic in health care (e.g. cardiovascular issues, obesity, or cancer) and analyze it. Then, integrate all of the steps and standards that are needed to meet the quality improvement and performance regulations that are accredited by such organizations as The Joint Commission (TJC) and the National Committee for Quality Assurance (NCQA). .
Now, you will present your work to key stakeholders in your organization. Create a PowerPoint presentation of 10-12 slides with speaker notes of 75-150 words which includes the following:
Explain why your health care topic is an important area of concern and research, and explain the challenges that will impact its population in the coming years based on your research.
Support your findings with an application of descriptive statistics.
Explain your grounded research capabilities.
Discuss risk-management assessment.
Present the data outcome in an Excel spreadsheet.
Include at least 4 credible references. All sources should be in APA format.
Part 2
Your department has taken the lead in developing many styles of reports. This work has raised a few questions throughout the organization. Therefore, you have been asked to present some helpful information on the structure of reporting. Draft a memo that explains the guidelines to follow when creating a memo for reporting purposes.
Explain the advantages and disadvantages of using spreadsheets to display information in reporting.
Explain which of the following are the best graphs to use in this situation, and why:
Tables
Pie charts
Line graphs
Bar graphs
Incorporate at least 1 chart or graph that demonstrates when it is appropriate to use one chart or graph over another.
Place your order now for a similar paper and have exceptional work written by our team of experts to guarantee you A Results
Topic: Explain the advantages and disadvantages of using spreadsheets to display information in reporting.
CLICK HERE TO ORDER YOUR PAPER. GET HIGH QUALITY PAPERS. <span style="color: #33…

Assignment status: Already Solved By Our Experts

(USA, AUS, UK & CA  PhD. Writers)

>> CLICK HERE TO ORDER 100% ORIGINAL PAPERS FROM AmericanWritingHelp.com <<

#075

We can work on Exploring the Visual Language of Display

FIND A SOLUTION  AT  AmericanWritingHelp.com

[embedded content]
Table of Contents
Introduction.. 3Theory, History and Method. 4
2.1.      Theories. 5
2.1.1.      The Cultural Capital Theory. 5
2.1.2.      The Habitus Theory. 6
2.1.3.      The Cultural Reproduction Theory. 6
2.2.      History. 6
2.3.      Methodology. 7
Discussion and Illustrations (1,500 words) 7Bibliography. 8
Today, having an understanding of how people interact with space especially in complex social ones for instance hotels is very critical. This is mainly because, this understanding is the one to be employed when designing the interior of these spaces. As such if one has a superficial understanding, the end results are spaces with very minimal human interaction resulting in little or no satisfaction. However, when the understanding is in-depth, the end results are spaces that are distinct and also elicit a good and desirable mood as well as taste among its users. The more people enjoy such spaces the more they end up frequenting them and also giving referrals. This in return is good for business for instance in hotels since there will be a high number of visitations. One of the ways through which this can be achieved in hotels, is the display of artistic collections.
This report looks at a 30-room boutique hotel located off the Trafalgar Square in London which was bought by a high-end collector who is a James Bond fanatic. The hotel was then redesign with the 007 theme with features such as an intimate 50-seater cinema and casino, an on-site tailor, a gadget shop as well as an Aston Martin. By the fact that the owner of the hotel is a high-end collector, it means that the hotel should contain a lot of artistic display with the main ones being those related to the James Bond Character or simply 007-themed. Therefore, this report is going to communicate the display of collection within the hotel. Additionally, it is also going to assess and communicate how the rooms of the hotel have been designed. In addition, the report will assess and communicate the design of the hotel’s public spaces.
James Bond is a film series that has been produced for around the last fifty years by EON Productions. The series mainly revolves around a fictional agent in the British Secret Service who is the main character, therefore, this makes it a spy series in general. Important to note is that the design features of spaces in the series have over the years been adopted by many designers in designing homes as well as other spaces such as hotels. This is the same concept that is going to be put into practice in this assessment which involves the design of a hotel building that is 007-themed. 007 is a franchise of the James Bond series and as such is directly related to it. Hence a 007 theme is the same as a James Bond theme.
The James Bond theme has been chosen by such establishments because there are millions of fanatics of the film worldwide. Therefore, by having a facility for instance a hotel with such a theme, it will target these individuals. This is because such people will go to such hotels to have a taste of what they have been seeing in the James Bond films. This brings about a certain level of self-actualisation and relaxation that cannot be achieved elsewhere.
Design as a concept mainly revolves around distinction and taste because in the case of a hotel, for an individual to be interested in it and even come back again, they will have to like the taste. Distinction mainly looks at the aspect of uniqueness for instance in terms of design concepts applied or even service among others. For instance, in the hotel industry, these have to be achieved by the proprietor through employing unique display collections. However, taste, on the other hand, is more of an individual function has different individuals have different tastes. According to McDermott (1994), taste involves critical human judgement with regards to objects as well as culture. Therefore, the scholar mentions that taste evokes a well though-of appreciation towards something that is pleasing to the eye. All these simply mean that taste with regards to human objects is based on an individual’s existing knowledge for them to be well informed about whether or not a certain object has good taste. Also, it is based on connoisseurship which mainly explains the knowledge that one should have with regards to fine arts, cuisines or even be an expert in making judgements regarding to matters involving taste. Besides, it is also based on critical appreciation. Critical appreciation simply means the intelligent understanding of certain objects so that they have an intelligent basis on whether they are of goof taste or not.  This brings forth the idea of theories surrounding the aspect of taste.
2.1.        Theories2.1.1.   The Cultural Capital Theory
Some of the proponents of this theory include famous sociologists for instance Lèvi-Strauss who later influenced sociologists such as Barthes and Bourdieu. According to this theory, people start early in life when they are neither savage or tasteful. However, this change when an individual grows up and has several cultural interactions because the initial perceptions become written over by the cultural systems especially those of communication that an individual interacts with. This is mainly the communication as well as culture embedded within the family structure.
Therefore, this is the reason why one will find that people from affluent backgrounds have a very distinct taste mainly opting for high-end and classy things as oppose from their counterparts from less-affluent backgrounds. This is mainly because this aspect of culture is passed from one generation to another and as such it is a factor that is always constant among similar people. On the other hand, culture can also mean the people that one interacts with, this means that an individual will tend to pick their tastes as well as mannerisms. Therefore, in terms of the case study hotel, it can be argued that fact that tastes as well as mannerisms are hereditary and can be predicted, charted and even traced getting traffic to the hotel will be made possible.
2.1.2.   The Habitus Theory
According to Bourdieu, this theory revolves around the insensible take-up of certain environmental behaviors by an individual then employing them in several matters for life. Therefore, the main point of inference in this theory is the environmental aspect whereby something which feels natural is good and also honest. Regarding the 007-themed hotel, this theory can be related to the fact that James Bond fanatics will be more than willing to pay to have a more natural feel of the James Bond movie by watching it from such a hotel and even be among spaces with man-made materials of the movie. Therefore, to them, the hotel is of good taste because of the simulation of the movie as well as stimulation. Furthermore, the 007-theme has a lot of inherent value features which individuals find them as a source for good taste. Therefore, having the hotel in such a theme makes the proprietor to be sure of the fact that James Bond fanatics will term it as one with good taste hence translate to good business for him.
2.1.3.   The Cultural Reproduction Theory
2.2.        History
2.3.        Methodology
For this assessment it is important to note that the methodology that will be followed in proposing or communicating how the hotel owner’s collection will be placed will mainly be adopted from reviewing several films from the film as well as looking at other hotels that have already applied the theme worldwide. This is the secondary research method whereby one looks at what has already done by others then based on that comes up with results to be applied elsewhere. Examples films from the James Bond series which will be reviewed to propose design solutions for this assessment include include the From Russia With Love (1963), Goldfinger (1964), Thunderball (1965), Die Another Day (2002) and most recently Skyfall (2012) among others. In the case of the 007-themed hotels that already exist, some of those reviewed include the Seven Hotel in Paris, the Isle of Erika Hotel in Scotland as well as the Sofitel London St. James in London among others.
McDermott, C. (1994), Essential Design, London: Bloomsbury, p. 195.


Related
Is this question part of your Assignment?
Custom Written Work
Guaranteed on Time
Achieve the Grade You ordered

Assignment status: Already Solved By Our Experts

(USA, AUS, UK & CA  PhD. Writers)

>> CLICK HERE TO ORDER 100% ORIGINAL PAPERS FROM AmericanWritingHelp.com <<

#075

Required information[The following information applies to the questions display

FIND A SOLUTION  AT  AmericanWritingHelp.com

24/7 Reliable Homework Help.
When your time is limited but you need to turn in a high-quality academic paper that will boost your grades.
[embedded content]
GET STARTED
Required information[The following information applies to the questions displayed below.] In 2017, Rashaun (62 years old) retired and planned on immediately receiving distributions (making withdrawals) from his traditional IRA account. The balance of his IRA account is $142,000 (before reducing it for withdrawals/distributions described below). Over the years, Rashaun has contributed $35,862 to the IRA. Of his $35,862 contributions, $22,862 was nondeductible and $13,000 was deductible. Assume Rashaun did not make any contributions to the account during 2017.b. If Rashaun currently withdraws $76,000 from the IRA, how much tax will he be required to pay on the withdrawal if his marginal tax rate is 28 percent? Download the Tax Form and enter the required values in the appropriate fields.  Please right click on attached Adobe document and select open in new window. Save your completed Tax Form to your computer and then upload it here by clicking “Browse.” Next, click “Save.” Use 2017 tax rules regardless of year on tax form. (Using the information provided in part b, complete Form 8606, Part I to report the taxable portion of the $76,000 distribution (withdrawal).)
Step 1: Your paper details
Give us your homework instructions,grading rubric, and anything elseyou think we need to completeyour assignment.
step 2: get your paper price
To do so, tell us your academic level,your assignment deadline, number of pages,and the assignment spacing.
step 3: Your Login details
Register an account with us,and pay for your academic paperby clicking on secure checkout.
last step: assign your paper
Once you’ve paid for your paper, we’ll then assign it to a course-specific writer(s). 
Here’s the paper you get from us:
Plagiarism-free paper.
Subject-specific content.
Neat presentation and flow.
Perfect spelling and grammar.
Correct assignment length.
Quality references used.
Correct referencing style.
Correct paper formatting.
Up to date references.
Authentic references.
HELP ME WRITE MY PAPER
And because your grades are too important to you, we give you these guarantees…
Plagiarism Free, Every Time: Every piece of work we deliver comes with a dedicated plagiarism report using Turnitin.
Complete Confidentiality: This is completely confidential. Your details will never be shared with anyone at all.
Always On Time: We stand firmly by our commitment to deliver your work on time because we know it’s URGENT.
Here are some of the emails we get from our clients
For the price of $24.99 a page, here’s exactly what you’ll get:
1 A high-quality paper written by a professional tutor with over 15 years writing experience.
2A 100% original paper written from scratch delivered to your email with a Turnitin report.
3Extra fast delivery on your paper this way you won’t have to miss a single deadline.
4Thorough quality checks performed to your paper right before we send it to you.
5A course-specific writer is assigned to your paper. Example, if you are a nursing student, we’ll give you a nursing graduate.
6Real time support through email and live chat. Available to you even on the weekends.
7Your paper will be eligible for free unlimited revisions.
Ready to try it for yourself too?
CLICK HERE TO GET STARTED
© 2018 | Intelli Essays Homework Service®

Assignment status: Already Solved By Our Experts

(USA, AUS, UK & CA  PhD. Writers)

>> CLICK HERE TO ORDER 100% ORIGINAL PAPERS FROM AmericanWritingHelp.com <<

#065

Supposedly you are inserting the above stem-and-leaf display in a report to besubmitted to…

FIND A SOLUTION  AT  AmericanWritingHelp.com

GET SOLUTION at academicwritersbay.com
Supposedly you are inserting the above stem-and-leaf display in a report to besubmitted to…

Question 1a) The following data represent the number of years patients survived after being diagnosed withterminal cancer(i) Construct a stem-and-leaf display (ii) Supposedly you are inserting the above stem-and-leaf display in a report to besubmitted to management, write a short comment on the diagram.b) The following data shows the weight (in kg) of 13 crabs found in a restaurant on a particular evening:(i) Compute the mean and median. (3 marks)(ii) Determine the shape of …
Assignment status: Solved by our Experts.
Source: © AcademicWritersBay.com

>> 100% ORIGINAL PAPERS FROM AcademicWritersBay.com <<

Assignment status: Already Solved By Our Experts

(USA, AUS, UK & CA  PhD. Writers)

>> CLICK HERE TO ORDER 100% ORIGINAL PAPERS FROM AmericanWritingHelp.com <<

#065

Determine the graphical display tool (e.g., Interaction Effects Chart, Scatter Chart, etc.) that you…

FIND A SOLUTION  AT  AmericanWritingHelp.com

Determine the graphical display tool (e.g., Interaction Effects Chart, Scatter Chart, etc.) that you would use to present the results of the DOE that you conducted in Question 1. Provide a rationale for your response.
Read the following case study.
A company wishes to improve its e-mail marketing process, as measured by an increase in the response rate to e-mail advertisements. The company has decided to study the process by evaluating all combinations of two (2) options of the three (3) key factors: E-Mail Heading (Detailed, Generic); Email Open (No, Yes); and E-Mail Body (Text, HTML). Each of the combinations in the design was repeated on two (2) different occasions. The factors studied and the measured response rates are summarized in the following table.
Write a two to three (2-3) page paper in which you:
Use the data shown in the table to conduct a design of experiment (DOE) in order to test cause-and-effect relationships in business processes for the company.
Determine the graphical display tool (e.g., Interaction Effects Chart, Scatter Chart, etc.) that you would use to present the results of the DOE that you conducted in Question 1. Provide a rationale for your response.
Recommend the main actions that the company could take in order to increase the response rate of its e-mail advertising. Provide a rationale for your response.
Propose one (1) overall strategy for developing a process model for this company that will increase the response rate of its e-mail advertising and obtain effective business process. Provide a rationale for your response.
Your assignment must follow these formatting requirements:
Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.
Topic: Determine the graphical display tool (e.g., Interaction Effects Chart, Scatter Chart, etc.) that you would use to present the results of the DOE that you conducted in Question 1. Provide a rationale for your response.

The Best Academic Writing Company

Assignment status: Already Solved By Our Experts

(USA, AUS, UK & CA  PhD. Writers)

>> CLICK HERE TO ORDER 100% ORIGINAL PAPERS FROM AmericanWritingHelp.com <<

#075